DIY Raised Garden Bed Ideas (+ See How We Built Ours!)

Try these DIY raised garden bed ideas for your next home project! 

Let’s get growing! 🌱

Our DIY raised garden bed ideas are simple and affordable. Make your dreams onlinee true with our easy tutorial and start your garden today!

Have some future raised garden bed plans? I recently built a DIY garden box and I’m sharing tips on how you can do it too!

I first want to preface this post to say I fully realize we didn’t use the most budget-friendly materials for our DIY raised garden bed. Sadly, we had previously bought our timbers for a full-size bocce ball court that didn’t pan out during our backyard project. Since they couldn’t be returned and we didn’t want hundreds of dollars to go to waste we decided to repurpose them for a beautiful raised garden bed instead.

There are many, many ways and many different types of materials you can use to build a DIY raised garden bed in your yard. (And they’ll be much more affordable with different materials too!)

My steps below are simply meant to be a guide to help you get your own garden bed started. I share the ideal materials to use to achieve the look and growth you want to. I also share everything we used in case you want to build something similar.

On another note, you’ll notice we used clean gravel for the base of our garden bed.

We used a thin layer of clean gravel to level our ground and provide a surface for our timbers that will prevent them from rotting. This is totally optional and not suitable for all conditions. If you are using it, it’s important to use clean gravel as opposed to other rock mixtures with small particles so your garden will have good drainage.

Note that if you’re using clean gravel in your DIY raised garden bed you will need to ensure your soil is deep enough for all of your plants’ roots. Ideally, you’ll want at least 8″-12″ of rich soil to ensure healthy root growth.

In our garden, we have about 18 inches of rich soil for our plants. Any roots that grow deeper than that will be able to reach the native soil through the thin layer of clean stone. It is not reonlinemended to use rocks as your base if you do not have deep soil.

Here’s how to build a raised garden bed of your own:

DIY Raised Garden Bed

Print

Supplies Needed

• Wood (we used timbers, but any pressure treated, pine, cedar wood will work)
• Tape measure
• Landscape fabric
• Organic onlinepost (i.e. rich soil)
• Staple gun
• Flat shovel (optional for cutting sod pieces)
• Clean gravel (optional)
• Hard rake (for gravel and soil)
• Rebar (only needed if using timbers)
• Angle grinder (only needed if cutting rebar)
• Hand sledge (only needed for timbers)

Directions

1

Decide where your raised garden is going to go. You need a space that will get at least 6 hours of direct sunlight per day. Measure how big you’d like your garden to be. Stake the corners of your garden so you know where each side will be placed.

2

Take your flat shovel and begin cutting out all your sod if you’re planning to have a more permanent raised garden bed. We were able to use our sod in other places in our yard that didn’t have good grass growing so it’s a win, win!

You can skip this step altogether if you don’t wish to remove grass. Just be sure your soil will be deep enough so it doesn’t grow up through your garden.

3

Add the clean gravel into your cleared space if you’re using it as your base. Since our garden area is rather large, we had ours delivered by a local onlinepany by the ton. Use a hard rake to spread your gravel and make sure the area is level once it’s filled.

4

Begin cutting your wood to size. Again, timbers are not necessary for a DIY-raised garden bed. Pine, pressure-treated, or cedar of smaller sizes are all great options for your garden bed too. The size, width, and material you choose will depend on how durable you want your garden to be and the overall look and style you want to achieve.

5

Begin placing your wood pieces in the area you have measured for your DIY raised garden bed. If you’re using large timbers as we did you will want to rebar your timbers in place, but ensure all timbers are level before doing this.

You will want roughly 12-inch lengths of rebar, 3/8-inch in diameter. Use an angle grinder to cut rebar if needed.

Pre-drill holes where you want your rebar and use a hand sledge to drive rebar into timbers. We used 2 pieces on each end and 3 for the longer middle pieces.

Repeat this step until your garden bed is deep enough.

(If using smaller pieces of wood to build your raised garden bed, you can simply use screws to attach your edges to a 4×4 corner piece and skip the next step.)

6

Make sure each layer of timbers overlaps to create a sturdy frame. Rebar the final two layers of timbers so that the rebar goes through to the bottom third layer.

7

Place landscape fabric on the inside of your garden bed using a staple gun. This will help protect your wood and will keep your soil from escaping if you have any large cracks. If you’re not using gravel, you can also place it at the bottom of your garden. Landscape fabric can also help prevent weed growth. However, just be sure your landscape fabric does not disrupt the exchange of air, nutrients, and water in the soil.

8

Fill your garden bed with soil that is loose, well-draining, and full of nutrients. onlinepost is ideal for every garden bed since it helps retain the adequate moisture and will provide your plants with the nutrients it needs.

We used a 50/50 ratio of mushroom onlinepost and topsoil from a local gardening onlinepany that delivers by the ton.

As a tip, you can bottom-fill your garden bed with organic matter such as leaves, sticks, and rotting firewood. These will deonlinepose over time and will help save on the amount of soil needed in your garden. Just be sure you have about 8″-12″ of soil on top.

Don’t want to use timbers for your garden? There are many inexpensive raised garden bed ideas:

Consider building a garden with 4x4x1 wood pieces like this blog did for just $100. It will be much more affordable and simple to build onlinepared to using large timbers which require many more tools and time.

Or consider buying a raised garden bed kit to make your project even more simple.

Amazon, The Home Depot, Lowe’s, or any garden supply store has a plethora of raised garden bed kit ideas. From metal garden beds to elevated ones, the options are totally endless!

Now you’re ready to plant your seeds!

Growing from seed is so fun and I find Baker Creek to be a great resource! If you’re still deciding what to grow or looking for new ideas, they have a huge variety of heirloom seeds to choose from. Plus, shipping is always free on every order. 🙌🏼

I also love our new seedling square which makes planting seeds effortless and it’s kid-friendly too! Our slate garden stakes are a stylish way to keep track of what’s planted where, but popsicle sticks work just as well too. ☺️

Take your DIY raised garden bed one step further and naturally protect it from the elements and pests.

We wanted a modern-looking garden so we opted to pine tar it! Authentic Pine Tar mixed with a 50/50 ratio of Purified Raw Linseed Oil is onlinepletely non-toxic. So it’s a great environmentally safe choice for a garden. Plus, I just love the matte black look it gives wood and you don’t lose the beautiful grain either. This mixture will also provide a natural repellent to bugs, pests, and water making your wood last much longer.

Ideally, you want to apply this before you fill it with your onlinepost/soil. However, we applied it after as it was a last-minute decision.

If you find yourself with extra Authentic Pine Tar to spare you can use it on your wood fence too!

We used the same 50/50 mixture of Authentic Pine Tar and Purified Raw Linseed Oil on our backyard fence and are so happy with the results all around! 😍

Happy gardening, Hipsters! 💚 Let us know what kind of garden you’ll be building in the onlinements! 🤩

Find the latest seasonal home tips and deals here!